wenglor CCD陣列條碼掃描儀
CCD陣列條碼掃描儀這種掃描儀在激光或紅光的幫助下識別條形碼。 照射在條形碼標簽上的光線被條形碼符號以不同的強度反射回光學元件，再借助于解碼器進行分析。
產品分類：機器視覺 其它 條碼識別
品牌：威格勒
產品介紹
CCD陣列條碼掃描儀這種掃描儀在激光或紅光的幫助下識別條形碼。 照射在條形碼標簽上的光線被條形碼符號以不同的強度反射回光學元件，再借助于解碼器進行分析。
Applications
•Reading of barcodes that are printed, needle printed, laser printed or etched directly on glossy materials
•Reading of barcodes with low contrast differences
•Reading of barcodes with bad printing quality
•Check of barcodes labels on completeness and quality of the information
•Identification of samples at automized distribution systems in medical or chemical areas
•Identification of products during and after production by means of barcodes
Outputs
Up to three optoisolator outputs are included.The outputs can be programmed to perform various functions:
•Good read
•No read
•Mismatch (does not match theｍａｓｔｅｒcode)
•Trend Analysis
Signal Inputs
One trigger input, one newｍａｓｔｅｒinput and one freely programmable input are included.
Interface
The scanner can be configured, and barcode data can be transmitted to aｍａｓｔｅｒcontroller via an RS-232, an RS-422 or an RS-485 interface.
Setup
The Scanner can be configured with a PC, or a comparable programming device. It is also possible to setup the scanners by pushing a button via the Auto-Button function.
Connection Possibilities
The Scanners can be interconnected via Daisy Chain or Multidrop. A crosslinking to Bus systems is possible via a separate Gateway (e. g. Profibus or Profinet).
投訴建議
提交
快速識別細微的對比度，【P1PW】威格勒新品推薦！
威格勒：流速和溫度，用一個傳感器搞定。
知識貼 | 超聲波傳感器，Q&A 速問速答
傳感器如何應對透明物體檢測挑戰？ —— （1）
【五一】致敬各行各業每一位勞動者！