TI AM62X Secure Boot 流程簡述
1). 簡介
嵌入式設備對于網絡安全的要求越來越高，而 Secure boot就是其中重要的一部分。 TI AM62X 處理器基于行業標準 X.509 認證來提供 Secure boot 啟動過程中的 Chain of Trust； X.509 認證是基于公共密鑰加密 (Public Key Cryptography) 和數字簽名 (Digital Signature) 技術來實現 Secure boot 的。AM62X 處理器涉及 Security 的架構框圖如下。
AM62X 處理器啟動流程圖參考如下。本文就基于 TI AM625 處理器平臺簡單介紹其 Secure Boot 的部署流程。
本文所演示的平臺來自于 Toradex Verdin AM62 嵌入式平臺，主要介紹基本的 Chain of Trust，也就是 U-boot和Linux Kernel/DTB 兩個層級的加密和驗證啟動，后面 Rootfs 以及 Application 層面暫不涉及。
2. 準備
a). Verdin AM62 ARM核心版配合Dahlia 載板，并連接調試串口用于測試。
b). 參考這里下載 Toradex Yocto Linux BSP6 Reference Image 用于后續測試，目前最新的是 6.7.0 版本。
3). 生成 Customer Key Set 文件
a). TI AM62 處理器有如下三種設備類型，其中 GP (General Purpose) 類型的處理器是不具備支持 Secure Boot 功能的，只有 HS (High Security) 類型的處理器是支持的，然后其還細分為兩個狀態，HS-FS (Field Securable) 和 HS-SE (Security Enforced)，具體的說明請見如下。TI AM62X HS 類型處理器出廠配置為 HS-FS 狀態，且都已經預先寫入了 TI Dummy Key 在設備中。
b). 由于將 HS 設備從 HS-FS 狀態配置為 HS-SE 狀態是不可逆的，因此本文為了方便演示流程僅僅使用 TI 預置的 Dummy Key 在 HS-FS 狀態下進行 Signed Image Authentication 流程演示，但會將 Customer key 的生成和燒錄流程進行說明。
c). 通過下面命令生成 Customer Root Key Set (SMPK) 和 Customer Back-up Key Set (BMPK)文件，用于后續的 Boot Image 簽名以及燒錄 Image 生成。
--------------------------------
### key name should not be changed ###
$ export Customer_KEYS_DIR=
$ export SMPK_NAME=custMpk
$ export BMPK_NAME=backMpk
### Create the SMPK key pair and certificate using RSA 4096 ###
$ cd $Customer_KEYS_DIR
$ openssl genrsa -F4 -out ${SMPK_NAME}.key 4096
$ cp ${SMPK_NAME}.key ${SMPK_NAME}.pem
$ openssl req -batch -new -x509 -key ${SMPK_NAME}.key -out ${SMPK_NAME}.crt
### Create the BMPK key pair and certificate using RSA 4096 ###
$ openssl genrsa -F4 -out ${BMPK_NAME}.key 4096
$ cp ${BMPK_NAME}.key ${BMPK_NAME}.pem
$ openssl req -batch -new -x509 -key ${BMPK_NAME}.key -out ${BMPK_NAME}.crt
### Remove write access to the keys and certificates ###
$ chmod a-w *
--------------------------------
4). Boot Image 編譯和簽名
a). 參考這里說明下載 Toradex Yocto Linux BSP 6.x.y 版本包含 U-boot在內的編譯 Boot Images 所需要的全部源代碼
--------------------------------
### Get the U-Boot source code for Yocto Linux BSP 6.x.y ###
$ git clone -b toradex_ti-u-boot-2023.04 https://git.toradex.cn/u-boot-toradex.git
$ export UBOOT_DIR=$(pwd)/u-boot-toradex
### Get the binary-only System Firmware (SYSFW) ###
$ git clone git://git.ti.com/k3-image-gen/k3-image-gen.git
$ export K3_DIR=$(pwd)/k3-image-gen
### Get the TI Linux Firmware ###
$ git clone -b ti-linux-firmware git://git.ti.com/processor-firmware/ti-linux-firmware.git
$ export TI_LINUX_FW_DIR=$(pwd)/ti-linux-firmware
### Get the ARM Trusted Firmware (ATF/TF-A) ###
$ git clone https://github.com/ARM-software/arm-trusted-firmware.git
$ export TFA_DIR=$(pwd)/arm-trusted-firmware
### Get the OP-TEE image source code ###
$ git clone https://github.com/OP-TEE/optee_os.git
$ export OPTEE_DIR=$(pwd)/optee_os
### Get the K3 Security development package:###
$ git clone https://git.ti.com/git/security-development-tools/core-secdev-k3.git -b master
$ export CORE_SECDEV_K3_DIR=$(pwd)/core-secdev-k3
--------------------------------
b). Customer Key Set 需要部署在 K3 Security development package 和 U-Boot source code 如下位置，默認部署的是 TI Dummy Key，本文因?yàn)槎际腔?nbsp;TI Dummy Key 進行測試，因此不做替換修改。
./ K3 Security development package
--------------------------------
$ cd $CORE_SECDEV_K3_DIR/keys
$ ls
custMpk.crt custMpk.key custMpk.pem swrv.txt ti-degenerate-key.pem
$ md5sum custMpk.key
bd90ee9fe69667315eeee32bc7a01b39 custMpk.key
$ md5sum custMpk.pem
bd90ee9fe69667315eeee32bc7a01b39 custMpk.pem
$ md5sum custMpk.crt
f2a1562c002fc38319bf82471b0661a3 custMpk.crt
### replace TI Dummy Key with Customer Key if needed ###
$ cp $Customer_KEYS_DIR/* $CORE_SECDEV_K3_DIR/keys
--------------------------------
./ U-Boot source code
--------------------------------
$ cd $UBOOT_DIR/board/ti/keys/
$ ls
custMpk.crt custMpk.key custMpk.pem swrv.txt ti-degenerate-key.pem
$ md5sum custMpk.key
bd90ee9fe69667315eeee32bc7a01b39 custMpk.key
$ md5sum custMpk.pem
bd90ee9fe69667315eeee32bc7a01b39 custMpk.pem
$ md5sum custMpk.crt
f2a1562c002fc38319bf82471b0661a3 custMpk.crt
### replace TI Dummy Key with Customer Key if needed ###
$ cp $Customer_KEYS_DIR/* $CORE_SECDEV_K3_DIR/keys
--------------------------------
c). 參考這里配置交叉編譯 toolchain，注意由于不同的固件需要對應 32bit 或者 64bit toolchain 編譯器，因此這里兩種 toolchain 都需要配置，配置完成后參考如下命令 export 32bit/64bit toolchain 相應的環境變量。
--------------------------------
### 64bit toolchain env ###
$ export ARCH=arm64
$ export DTC_FLAGS="-@"
$ export PATH=~/gcc-linaro-aarch64/bin/:$PATH
$ export CROSS_COMPILE=aarch64-none-linux-gnu-
### 32bit toolchain env ###
$ export PATH=~/gcc-linaro-arm/bin/:$PATH
--------------------------------
d). 參考這里對 Boot Images 進行編譯
./ Build ARM Trusted Firmware (ATF/TF-A)
--------------------------------
$ cd $TFA_DIR
$ export ARCH=arm64 CROSS_COMPILE=aarch64-none-linux-gnu-
$ unset TFA_EXTRA_ARGS
$ make PLAT=k3 SPD=opteed $TFA_EXTRA_ARGS TARGET_BOARD=lite
--------------------------------
./ Build OP-TEE Image
--------------------------------
$ cd $OPTEE_DIR
$ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
$ export ARCH=arm
$ export CROSS_COMPILE=arm-none-linux-gnueabihf-
$ export CROSS_COMPILE64=aarch64-none-linux-gnu-
$ make PLATFORM=k3-am62x CFG_ARM64_core=y $OPTEE_EXTRA_ARGS
--------------------------------
./ Build U-Boot for R5
--------------------------------
### Step-1 under U-boot directory ###
$ cd $UBOOT_DIR
$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- verdin-am62_r5_defconfig
$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- BINMAN_INDIRS=$TI_LINUX_FW_DIR
### Step-2 under System Firmware directory ###
$ cd $K3_DIR
$ make SOC=am62x SOC_TYPE="hs-fs" TI_SECURE_DEV_PKG=$CORE_SECDEV_K3_DIR SBL=$UBOOT_DIR/spl/u-boot-spl.bin SYSFW_DIR=$TI_LINUX_FW_DIR/ti-sysfw
$ cp tiboot3-am62x-hs-fs-evm.bin ../tiboot3-am62x-hs-fs-verdin.bin
--------------------------------
// 對應不同的 SOC_TYPE 選項，會生成不同的 Binary Image，其對應關系參考如下兩個表格，在出廠默認的 HS-FS SoC Type 下，需要編譯HS-FS 對應的固件；而一旦通過 TI OTP Keywriter 工具將 Customer Key 寫入 eFUSE 并將設備配置為 HS-SE 狀態后，就需要編譯 HS-SE SOC Type 對應的固件才能正常啟動了。
./ Build U-Boot for A53
--------------------------------
### Default configuration ###
$ cd $UBOOT_DIR
$ export ARCH=arm64 CROSS_COMPILE=aarch64-none-linux-gnu-
$ make verdin-am62_a53_defconfig
### Customized configuration to force FIT image to be authenticated ###
$ make menuconfig
CONFIG_FIT_SIGNATURE_ENFORCE=y
### Compile ###
$ make BINMAN_INDIRS=$TI_LINUX_FW_DIR \
BL31=$TFA_DIR/build/k3/lite/release/bl31.bin \
TEE=$OPTEE_DIR/out/arm-plat-k3/core/tee-raw.bin
$ cp tispl.bin ../
$ cp u-boot.img ../
--------------------------------
5). 簽名Linux kernel FIT Image
a). 此步驟為可選步驟，如果不需要強制 FIT Image Authentication 則在上面 4.d Build U-Boot for A53 步驟中可以不使能 CONFIG_FIT_SIGNATURE_ENFORCE 配置，然后跳過此章節直接進行 BSP Image 修改部署章節即可。
b). 解壓 Toradex Ycoto Linux BSP6 Image，獲得 LInux Kernel/DTB/DTBO 等文件
--------------------------------
### uncompress BSP Image package ###
$ tar xvf Verdin-AM62_Reference-Minimal-Image-Tezi_6.7.0+build.13.tar
$ cd Verdin-AM62_Reference-Minimal-Image-Tezi_6.7.0+build.13/
### uncompress boot filesystem ###
$ mkdir bootfs/
$ tar Jxf Reference-Minimal-Image-verdin-am62.bootfs.tar.xz -C bootfs/
### copy kernel/dtb/dtbo image fit image work folder ###
$ export FIT_IMAGE_DIR=
$ cd bootfs/
$ cp -r * $FIT_IMAGE_DIR
--------------------------------
c). 修改 FIT Image 描述文件，一個示例說明部分如下，需要根據你實際存放 Linux Kernel/DTB/DTBO 文件的位置來修改文件 “data” 參數本文使用的完整描述文件模板請從這里下載。
./ fitImage-its--6.1.83+git0+0a32d33d5f-r0-verdin-am62-20240701094251.its
--------------------------------
/dts-v1/;
/ {
description = "Kernel fitImage for TDX Wayland with XWayland/6.1.83+gitAUTOINC+0a32d33d5f/verdin-am62";
#address-cells = <1>;
images {
kernel-1 {
description = "Linux kernel";
data = /incbin/("$FIT_IMAGE_DIR/Image.gz");
type = "kernel";
arch = "arm64";
os = "linux";
compression = "gzip";
load = <0x80200000>;
entry = <0x80200000>;
hash-1 {
algo = "sha512";
};
};
fdt-ti_k3-am625-verdin-nonwifi-dahlia.dtb {
description = "Flattened Device Tree blob";
data = /incbin/("$FIT_IMAGE_DIR/k3-am625-verdin-nonwifi-dahlia.dtb");
type = "flat_dt";
arch = "arm64";
compression = "none";
load = <0x83000000>;
hash-1 {
algo = "sha512";
};
};
...
...
--------------------------------
d). 生成 FIT Image
./ 由于在生成 FIT Image 的時候需要同時將 Public Key 信息嵌入到 u-boot.dtb，因此這里需要找到 U-Boot 默認的 dtb 文件。根據 U-Boot 編譯 default configuration 來確認默認的 dtb 文件即為 "arch/arm/dts/k3-am625-verdin-wifi-dev.dtb"
--------------------------------
$ vi $UBOOT_DIR/configs/verdin-am62_a53_defconfig
...
CONFIG_DEFAULT_DEVICE_TREE="k3-am625-verdin-wifi-dev"
...
--------------------------------
./ 在 FIT Image work folder 通過下面命令生成簽名的 FIT Image
--------------------------------
$ mkimage -f fitImage-its--6.1.83+git0+0a32d33d5f-r0-verdin-am62-20240701094251.its -k $UBOOT_DIR/board/ti/keys -K $UBOOT_DIR/arch/arm/dts/k3-am625-verdin-wifi-dev.dtb -r fitImage
--------------------------------
e). 根據 4.d Build U-Boot for A53 步驟，不修改任何 configuration的情況下，重新編譯 U-Boot Image
--------------------------------
$ cd $UBOOT_DIR
### Compile ###
$ make BINMAN_INDIRS=$TI_LINUX_FW_DIR \
BL31=$TFA_DIR/build/k3/lite/release/bl31.bin \
TEE=$OPTEE_DIR/out/arm-plat-k3/core/tee-raw.bin
$ cp tispl.bin ../
$ cp u-boot.img ../
--------------------------------
6). 修改和部署 Yocto Linux BSP
a). 使用 4.d Build U-Boot for R5 步驟生成的 “tiboot3-am62x-hs-fs-verdin.bin” 文件和 5.e 步驟重新編譯生成的 “tispl.bin” 和 “u-boot.img” 文件修改 Yocto Linux BSP 對應的 Boot Images 文件
--------------------------------
$ cd Verdin-AM62_Reference-Minimal-Image-Tezi_6.7.0+build.13/
$ rm tiboot3-am62x-hs-fs-verdin.bin tispl.bin u-boot.img
$ cp .../tiboot3-am62x-hs-fs-verdin.bin .
$ cp .../tispl.bin .
$ cp .../u-boot.img .
--------------------------------
b). 將 5.d 步驟生成的 FIT Image 部署到剛才解壓的Ycoto Linux BSP6 bootfs中，并重新創建bootfs 壓縮包
--------------------------------
### copy FIT image to bsp rootfs folder ###
$ cp $$FIT_IMAGE_DIR/fitImage .../Verdin-AM62_Reference-Minimal-Image-Tezi_6.7.0+build.13/bootfs/
### remove default Linux kernel/dtb/dtbo files ###
$ cd .../Verdin-AM62_Reference-Minimal-Image-Tezi_6.7.0+build.13/bootfs/
$ rm -rf Image.gz k3-am625-verdin-* overlays
### check bootfs files ###
$ tree -L 1
.
├── boot.scr
├── fitImage
└── overlays.txt
### compress new bootfs package ###
$ tar Jcf ../Reference-Minimal-Image-verdin-am62.bootfs.tar.xz *
### clear bootfs
$ cd ..
$ rm -rf bootfs/
--------------------------------
c). 修改BSP package中的 “u-boot-initial-env-sd” 文件，增加如下環境變量用于使能 U-Boot 加載 FIT Image 來啟動
--------------------------------
--- a/u-boot-initial-env-sd 2024-07-01 18:00:22.000000000 +0800
+++ b/u-boot-initial-env-sd 2024-09-12 16:35:02.000000000 +0800
@@ -30,6 +30,7 @@
kernel_addr_r=0x88200000
kernel_comp_addr_r=0x80200000
kernel_comp_size=0x08000000
+kernel_image=fitImage
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x88200000
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
--------------------------------
d). 需要注意的是由于Kernel階段的Secure Boot相關認證和加載都是基于U-Boot 環境變量來實現的， 因此如果要讓這個啟動機制更加安全可靠，則要讓U-Boot保持在上述安全啟動路徑，而不能通過其他啟動介質或者腳本來啟動而繞開 Secure Boot，比如 Toradex U-Boot默認是使能 Distro Boot 功能的，可以自動掃描外設介質的啟動腳本，那么這個功能就需要關閉掉，類似這樣的 U-Boot 定制化和啟動路徑固化可以參考如下文章，本文不做進一步介紹。
https://developer.toradex.cn/torizon/security/u-boot-hardening-for-secure-boot/
e). 如果你的 Linux BSP Image 是通過 Yocto Project 編譯生成，那么如下是一個 Toradex Security Meta Layer，你可以直接將其集成到你的 Yocto Project 編譯環境中，然后按照說明配置后直接生成簽名甚至加密好的 BSP Image。
https://github.com/toradex/meta-toradex-security
7). 部署測試
a). 參考這里將上述制作完成數字簽名的 BSP Image通過 Toradex Easy Installer 更新到 Verdin AM62 模塊。因?yàn)楸疚臏y試基于 TI 已經預先燒寫到 SoC 的 dummy key，所以可以直接啟動測試，如果是使用 Customized Key，則還需要參考后續 eFuse 燒寫操作將 Customized Key 燒寫到 SoC 才能正確驗證并啟動。
./ 啟動后查看啟動log，可以看到 Boot Images 和 Linux FIT Image (Kernel Image/DTB/DTBO) Secure Boot驗證簽名成功并最終完整啟動
--------------------------------
U-Boot SPL 2023.04-28170-gc997b1b09fb (Sep 10 2024 - 17:41:33 +0800)
SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
Changed A53 CPU frequency to 1250000000Hz (T grade) in DT
SPL initial stack usage: 13472 bytes
Trying to boot from MMC1
Authentication passed // ATF authentication
Authentication passed // TEE authentication
Authentication passed // DM-FW authentication
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed // A53 SPL authentication
Authentication passed // A53 SPL DTB authentication
Starting ATF on ARM64 core...
NOTICE: BL31: v2.11.0(release):v2.10.0-1555-g8e9bdc5b1
NOTICE: BL31: Built : 17:04:05, Aug 30 2024
...
U-Boot SPL 2023.04-28170-gc997b1b09fb (Sep 12 2024 - 16:56:27 +0800)
SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)')
SPL initial stack usage: 1904 bytes
Trying to boot from MMC1
Authentication passed // A53 u-boot authentication
Authentication passed // A53 u-boot DTB authentication
U-Boot 2023.04-28170-gc997b1b09fb (Sep 12 2024 - 16:56:27 +0800)
SoC: AM62X SR1.0 HS-FS
DRAM: 1 GiB
Core: 143 devices, 31 uclasses, devicetree: separate
...
Found U-Boot script /boot.scr
6003 bytes read in 10 ms (585.9 KiB/s)
## Executing script at 90280000
82 bytes read in 9 ms (8.8 KiB/s)
8918270 bytes read in 78 ms (109 MiB/s)
Bootargs: root=PARTUUID=33e36968-02 ro rootwait console=tty1 console=ttyS2,115200 consol0
## Loading kernel from FIT Image at 90300000 ...
Using 'conf-ti_k3-am625-verdin-wifi-dev.dtb' configuration
Verifying Hash Integrity ... sha512,rsa4096:custMpk+ OK // Kernel Image authentication
Trying 'kernel-1' kernel subimage
Description: Linux kernel
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x90300108
Data Size: 8305029 Bytes = 7.9 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x80200000
Entry Point: 0x80200000
Hash algo: sha512
Hash value: 1eae3ec7c7d250d709d07f8af174e8de9c2293a9a61683f1f1a4f5981e96dc9ab090cc
Verifying Hash Integrity ... sha512+ OK
## Loading fdt from FIT Image at 90300000 ...
Using 'conf-ti_k3-am625-verdin-wifi-dev.dtb' configuration
Verifying Hash Integrity ... sha512,rsa4096:custMpk+ OK // Kernel DTB authentication
Trying 'fdt-ti_k3-am625-verdin-wifi-dev.dtb' fdt subimage
...
Verifying Hash Integrity ... sha512+ OK
Loading fdt from 0x90b40bd0 to 0x83000000
## Loading fdt from FIT Image at 90300000 ...
Using 'conf-verdin-am62_dsi-to-hdmi_overlay.dtbo' configuration
Verifying Hash Integrity ... sha512,rsa4096:custMpk+ OK // DTBO authentication
Trying 'fdt-verdin-am62_dsi-to-hdmi_overlay.dtbo' fdt subimage
...
Verifying Hash Integrity ... sha512+ OK
## Loading fdt from FIT Image at 90300000 ...
Using 'conf-verdin-am62_spidev_overlay.dtbo' configuration
Verifying Hash Integrity ... sha512,rsa4096:custMpk+ OK // DTBO authentication
Trying 'fdt-verdin-am62_spidev_overlay.dtbo' fdt subimage
...
Verifying Hash Integrity ... sha512+ OK
Booting using the fdt blob at 0x83000000
Working FDT set to 83000000
Uncompressing Kernel Image
Loading Device Tree to 0000000098ec8000, end 0000000098edc6b5 ... OK
Working FDT set to 98ec8000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.83-6.7.0+git.0a32d33d5fb7 (oe-user@oe-host) (aarch64-td4
[ 0.000000] Machine model: Toradex Verdin AM62 WB on Verdin Development Board
...
--------------------------------
b). AM62x SoC eFuse 燒寫以及將設備從 HS-FS 轉換為 HS-SE 狀態
./ eFuse 燒寫流程詳細燒寫流程可以參考這里。
./ 首先下載安裝最新 TI MCU+ SDK，以及對應版本的 CCS 和 sysconfig 工具到 Linux 開發主機
./ 安裝 TI OTP Keywriter 工具軟件和使用指南，這些是 secure 資料，需要在 TI 網站上面注冊申請通過后才能獲取。安裝路徑為
--------------------------------
$ tree -L 2 ~/ti/mcu_plus_sdk_am62x_10_00_00_14/source/security/
/home/simon/ti/mcu_plus_sdk_am62x_10_00_00_14/source/security/
├── sbl_keywriter
│ ├── am62x-sk
│ ├── boardcfgs
│ ├── keywr_bin
│ ├── manifest
│ ├── scripts
│ └── tools
├── uninstall
└── uninstall.dat
--------------------------------
./ 生成 X.509 Certificate
// Keywriter 預置 TI dummy key，因此如果是基于 TI dummy key set 進行生成，則命令如下。注意 “--keyrev” 參數，只要這個參數被燒寫到了 eFuse 上面，那么這個設備就立即轉化為 HS-SE 狀態，所有 secure boot 限制將都生效，設備也無法再次刷寫其他 key 信息，因此此過程可以分步或者一次進行，前期測試階段建議分步，先燒寫 key，進行驗證通過后，再進行 keyrev 燒寫，將設備變更為 HS-SE 狀態。
--------------------------------
### Generate X.509 certificate ###
### Option-1, step by step
$ cd
## Generate certificate for programming MSV(Model Specific Value) and TI dummy key sets, but not turn device into HS-SE
$ ./gen_keywr_cert.sh -t tifek/ti_fek_public.pem --msv 0xC0FFE -b-def --bmek-def -s-def --smek-def --keycnt 2
## Generates certificate for setting the program key revision to 1
./gen_keywr_cert.sh -t tifek/ti_fek_public.pem --keyrev 1
### Option-2, one-shot
## programming MSV, key sets, and turn device into HS-SE in one shot command
$ ./gen_keywr_cert.sh -t tifek/ti_fek_public.pem --msv 0xC0FFE -b-def --bmek-def -s-def --smek-def --keycnt 2 --keyrev 1
### Convert certificate binary to .h format ###
$ cd
$ python3 ../../../../../tools/bin2c/bin2c.py final_certificate.bin keycert.h KEYCERT 2024
--------------------------------
// 如果是基于 customized key set，則要將相關命令修改如下：
--------------------------------
### Copy customized key set for keywriter ###
$ cd
$ cp $Customer_KEYS_DIR/custMpk.key keys_devel/smek.key
$ cp $Customer_KEYS_DIR/custMpk.pem keys_devel/smpk.pem
$ cp $Customer_KEYS_DIR/backMpk.key keys_devel/bmek.key
$ cp $Customer_KEYS_DIR/backMpk.pem keys_devel/bmpk.pem
### Generate X.509 certificate ###
### Option-1, step by step
$ cd
## Generate certificate for programming MSV(Model Specific Value) and TI dummy key sets, but not turn device into HS-SE
$ ./gen_keywr_cert.sh -t tifek/ti_fek_public.pem --msv 0xC0FFE -b keys_devel/bmpk.pem --bmek keys_devel/bmek.key -s keys_devel/smpk.pem --smek keys_devel/smek.key --keycnt 2
## Generates certificate for setting the program key revision to 1
./gen_keywr_cert.sh -t tifek/ti_fek_public.pem --keyrev 1
### Option-2, one-shot
## programming MSV, key sets, and turn device into HS-SE in one shot command
$ ./gen_keywr_cert.sh -t tifek/ti_fek_public.pem --msv 0xC0FFE -b keys_devel/bmpk.pem --bmek keys_devel/bmek.key -s keys_devel/smpk.pem --smek keys_devel/smek.key --keycnt 2 --keyrev 1
### Convert certificate binary to .h format ###
$ cd
$ python3 ../../../../../tools/bin2c/bin2c.py final_certificate.bin keycert.h KEYCERT 2024
--------------------------------
./ 生成 keywriter binary - tiboot3.bin
--------------------------------
### create compiler soft link ###
$ cd
$ ln -s ccs1271/ccs/tools/compiler/ti-cgt-armllvm_3.2.2.LTS ti-cgt-armllvm_3.2.2.LTS
### Generate binary ###
$ cd
$ make -sj clean PROFILE=debug
$ make -sj PROFILE=debug
--------------------------------
./ 將 tiboot3.bin 通過 USB DFU 模式加載運行起來，具體的命令可以參考這里，只是需要注意的是由于燒寫 eFuse 的過程中還需要 AM62X SoC VPP 管腳上拉到 1.8V 同時具備至少 400mA 瞬態電流負載能力，因此需要在載板上面部署相應的硬件設計，以保證僅在燒寫 eFuse 的時候拉高 VPP 管腳同時提供足夠的瞬變電流，而在其他任何時候 VPP 管腳都是拉低的狀態。參考如下 TI AM62 SK 開發板設計，如圖一布置了一個單獨的 LDO 電源芯片(TLV75518PDQNR) 來給 VPP 管腳提供 400mA/1.8V 供電，正式由于極高的瞬變電流負載需求，load switch 或者 DC/DC 電源是不建議使用的；而 LDO 的開關則通過 VPP_LDO_EN 信號來控制。如圖二，則是 AM62X SoC 通過 I2C 總線連接了一個 GPIO Expander 芯片來擴展 GPIO 管腳提供 VPP_LDO_EN 信號控制。
// 對于 IO Expander VPP_LDO_EN GPIO 管腳的控制軟件代碼請參考 MCU+ SDK 如下文件，你也可以根據你的實際載板設計來相應修改適配。
8). 總結
本文基于 TI AM62X 處理器簡單演示了 Secure Boot 流程，涉及 Boot Images 和 Linux Kernel/DTB ，至于 Rootfs 的加密，則需要配置類似 Squashfs 只讀文件系統配合 Initramfs RAM Disk 鏡像進行加解密掛載啟動，可以結合參考如下兩篇文章和相關 meta-toradex-security layer 數據參考，本文不做具體測試。
./ 嵌入式 ARM 平臺使用dm-crypt加密磁盤分區
./ 使用Squashfs和Overlayfs提高嵌入式Linux文件系統可靠性
./ https://github.com/toradex/meta-toradex-security
投訴建議
提交
基于 TI AM62 測試 QtWayland 部署
Verdin AM62 LVGL 移植
基于 NXP iMX8MM 測試 Secure Boot 功能
隆重推出 Aquila - 新一代 Toradex 計算機模塊
Verdin iMX8MP 調試串口更改